Pine furniture is a kind of solid wood furniture, so it has many similarities with solid wood furniture in terms of purchase:
1. Lightly press each stress point of the furniture, such as column corners, drawers or shelf supports, etc., to test whether it is stable;
2. Pay special attention to the joints of heavy furniture components, which should be fastened with screw caps;
3. Check the sliding and positioning of the drawers, open all door leaves, and make sure they are installed properly and are in good use;
4. Touch the surface of the furniture with your hand to see if they are smooth and if it is possible to hook the protrusions of the clothes;
5. It depends on whether the wood texture is clear and clear.

Furniture maintenance: Pine wood is very natural, so you need to pay attention to the following 3 aspects in maintenance.
1: Always use a soft cloth along the texture of the wood grain to remove dust from the furniture. Before removing dust, you should apply a spray cleaner on the soft cloth;
2: When in use, use a mat as much as possible under the hot plate, so as to avoid overflowing of the food soup, staining or damaging the tabletop;
3: Try to avoid contact with corrosive liquids, alcohol, nail polish, etc. on the furniture surface.
There is a wonderful way to remove pine oil: many consumers often encounter pine oil (pine resin) remaining in the pine wood or seeping out of the surface during the use of pine furniture, which not only causes difficulty in painting, but also affects the appearance and use effect. If you want to get rid of the pine oil in the pine wood, you can choose the following methods:
(1). Alkaline washing method
Use 8%~10% sodium carbonate (edible soda noodles) aqueous solution, or 4%~6% caustic soda solution to clean the pine oil parts of the pine to saponify the pine oil (oil and alkali react to become soap and glycerin) , Then use a sponge or brush dipped in hot water (40~50℃) to scrub and rinse.
(2). Rinse method
Add 20 grams of bleaching powder to 0.5 kilograms of warm water to dissolve it. Use this solution to repeatedly paint the pine oiled parts of the pine until it becomes slightly white, and then rinse with water.
(3) Eradication method
For the part where the pine oil seeps more, you can use a spatula to remove the part, and then smooth it with mud. No matter which method is used, it needs to be scrubbed with ethanol (alcohol) or a layer of shellac varnish to prevent the pine oil that has not been removed from the pine wood from leaking out and affecting the paint film.
(4). Dissolution method
Dissolve with 25% acetone aqueous solution, and brush with a mixture of 20% acetone aqueous solution and a small amount of alkali.

Posted by: toiletsbath at 02:09 AM | No Comments | Add Comment
Post contains 493 words, total size 3 kb.

1. The choice of solid wood furniture must first check whether the structure is firm or not. It can be tested by pushing longitudinally with force and pressing by hand.
2. When shopping, stand one meter away and observe whether the colors are the same. If they are inconsistent, it is a color difference.
3. The surface treatment should be seen from the details, such as joints and back bends, whether the joints are tight and whether they are consistent with the positive effect.
4. In case of lines or special-shaped styles, you can check the light for unevenness, whether the lines are smooth, whether the surface paint is uniform, whether the hand is smooth, whether there are burrs, etc., and the colors are found to be bumpy Yes, that is, the color is not uniform, there are small circles on the surface, etc. It is a product with imperfect workmanship and must be observed under light.
5. Where it is connected to the hardware, check whether the cooperation between the hardware and the wood is reasonable. If the workmanship is not good, there are often paint on the hardware, scars on the wood, or problems with the firmness.

Posted by: toiletsbath at 06:23 AM | No Comments | Add Comment
Post contains 208 words, total size 1 kb.

Household folding dining table and chair
Can stretch freely in a limited space, exquisite craftsmanship, meticulous polishing, delicate and smooth texture, suitable for any decoration style. Some foldable dining tables have their own storage functions, which greatly increase the storage capacity of small-sized spaces. At the same time, chairs can also be placed inside the foldable dining table and used when necessary to improve space utilization.
Home telescopic dining table and chair
The main feature of the retractable dining table is that it does not occupy a large area. At the same time, consumers can reasonably use the stretchable function of the retractable dining table according to their own wishes. However, the retractable dining table is generally placed in a fixed place, which is not convenient to move
Household round dining table and chair
The round dining table and chairs are more prominent in appearance and occupy a slightly larger space area. It can generally meet 6-8 people to eat at the same time, so it is generally suitable for families with larger restaurants and more people.
Household rectangular dining table and chair
The rectangular dining table is a geometric rectangular shape. Under the same circumstances, it occupies a smaller area than a round dining table. Generally, it can meet 4-6 people to eat at the same time. The area occupied by the restaurant is not so harsh.
Household square dining table and chair
The square dining table is especially suitable for small-sized houses and can be placed against the wall without taking up too much space. But the square dining table has edges and corners, so collisions will inevitably occur, and the safety factor is relatively low. Also, due to the limitation of the shape of the dining table, if there are too many people, it is too crowded to get together. Card seat sofa, dining table and chair for household use. Household card seat sofa, dining table and chair eliminates the aisle behind the chair and the space between the chair and the chair, which can seat more people. In addition, the space under the chair can be made into storage, which is more practical.
Household dining table and chair with turntable
Rely on the hand to push the plate to turn, push it fast and turn it fast, push it slow, turn it slow, don’t push it, don’t turn it

Posted by: toiletsbath at 02:56 AM | No Comments | Add Comment
Post contains 403 words, total size 3 kb.

Posted by: toiletsbath at 05:53 AM | No Comments | Add Comment
Post contains 175 words, total size 1 kb.

1. Solid wood The solid wood chair and stool have natural color and natural fragrance. There are many kinds of solid wood materials, such as beech, teak, ash, elm, poplar, pine, etc. Among them, ash, beech, and oak are precious woods.

2. Most steel and steel chairs and stools are made of stainless steel and other materials. This kind of seat is very strong and not easy to be damaged. After sanding and zinc spraying, it is not only wear-resistant and corrosion-resistant, but also very easy to use. Comfortable.

3. WPC, also known as environmentally friendly WPC, is a new type of material made by blending plastic and wood pulp. It is formed by molds and is not controlled by wood raw materials during the production process. It can be fully controlled by the designer. Implementation of creativity. This kind of chair stool is very resistant to corrosion and has a very long service life.
4. Rattan The rattan chair stool is made of rattan. This kind of chair is not only compact and strong, but also light and concise, with good air permeability, which can bring you back to the original feeling.
5. Plastic Plastic chair stools are usually made of polypropylene and polyethylene, and their materials are different, in terms of performance and quality. At present, there are more plastic chair stools made of original plastic.
6. Bamboo strips Bamboo chairs and stools are also woven, which mainly rely on their own tension and interspersed forces to bear the weight. In the process of using the bamboo chair stool, it can show different curvatures according to the different weight of each person, so that people can get a more comfortable experience.
7. Stone Stone chairs and stools are relatively rare. They are not easy to be damaged, weathered, and have various styles. This type of seat is usually heavy and is mostly used in indoor and outdoor public places.
8. Special materials There are many chairs and stools made of special materials on the market, such as glass, foam materials, sponges, mixed materials, etc. Among them, fabric chair stools and leather chair stools are more common mixed materials.

Posted by: toiletsbath at 06:21 AM | No Comments | Add Comment
Post contains 370 words, total size 2 kb.

The stools with round holes are mainly plastic stools. The round holes can facilitate mold making and save a little material. In addition, there are many functions beyond what you can think of when designing round holes.
1. Plastic stools have an obvious advantage over wooden chairs, that is, they can be stacked together without taking up much space. When you separate these stacked stools, you can buckle the round holes with your hands. If the holes are square, the four corners will be more forceful and the stool will tear easily. The round holes can distribute the force everywhere.
2. When it is hot in summer, if you sit on a flat wooden chair for a long time, some heat of the human body will not be easily emitted. At this time, there will be a lot of sweat near the buttocks and stick the pants to the surface of the chair.
3. If you find a breathable cushion to put on the chair, this will not happen, because the heat can be dissipated through the gap of the cushion.
4. The round holes on the plastic stool can radiate a certain amount of heat, and when the plastic stool is made, there are often some raised patterns on the surface of the stool, which can also play a role in ventilation and heat dissipation.
5. Nowadays, many people need to sit at the desk for a long time due to work reasons. A serious hazard of sitting for a long time is the poor blood circulation in the buttocks and perineum, and it may even affect the blood circulation in the legs. If you are sitting on a chair with a flat surface, even if you move your buttocks from time to time, the original part of the blood vessel is often compressed. After replacing the stool with holes, the pressure on the blood vessels can be reduced to a certain extent, which is conducive to the smooth flow of blood circulation.
6. Some cyclists often need to ride for a long time, the design of the mountain bike seat is more thoughtful. There is not only a hole in the middle, but also an obvious groove, which plays a role of heat dissipation and avoids compression of the blood vessels in the perineum. This design can protect the health of the rider to a greater extent.

Posted by: toiletsbath at 01:57 AM | No Comments | Add Comment
Post contains 408 words, total size 2 kb.